prikaz prve stranice dokumenta Projektiranje izrade metalnog ormarića primjenom CAD alata
  Download
PDF 4.6 MB
undergraduate thesis
Projektiranje izrade metalnog ormarića primjenom CAD alata
2021. urn:nbn:hr:137:426008
Polić, Karlo
University of Pula
Juraj Dobrila University of Pula, Department of Engineering

Cite this document

Polić, K. (2021). Projektiranje izrade metalnog ormarića primjenom CAD alata (Undergraduate thesis). Pula: University of Pula. Retrieved from https://urn.nsk.hr/urn:nbn:hr:137:426008

Polić, Karlo. "Projektiranje izrade metalnog ormarića primjenom CAD alata." Undergraduate thesis, University of Pula, 2021. https://urn.nsk.hr/urn:nbn:hr:137:426008

Polić, Karlo. "Projektiranje izrade metalnog ormarića primjenom CAD alata." Undergraduate thesis, University of Pula, 2021. https://urn.nsk.hr/urn:nbn:hr:137:426008

Polić, K. (2021). 'Projektiranje izrade metalnog ormarića primjenom CAD alata', Undergraduate thesis, University of Pula, accessed 01 April 2025, https://urn.nsk.hr/urn:nbn:hr:137:426008

Polić K. Projektiranje izrade metalnog ormarića primjenom CAD alata [Undergraduate thesis]. Pula: University of Pula; 2021 [cited 2025 April 01] Available at: https://urn.nsk.hr/urn:nbn:hr:137:426008

K. Polić, "Projektiranje izrade metalnog ormarića primjenom CAD alata", Undergraduate thesis, University of Pula, Pula, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:137:426008

Please login to the repository to save this object to your list.
Metadata
TitleProjektiranje izrade metalnog ormarića primjenom CAD alata
Title (english)Designing production of metal cabinet using CAD tools
AuthorKarlo Polić
MentorMarko Kršulja (mentor)
Committee memberVedrana Špada (predsjednik povjerenstva)
Committee memberMarko Kršulja (član povjerenstva)
Committee memberLoreta Pomenić (član povjerenstva)
GranterUniversity of Pula
(Juraj Dobrila University of Pula, Department of Engineering)
Pula
Defense date and country2021-07-02, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
Hipoteza je konkurentnost primjene tehnologije softvera Fusion 360 pri izradi metalnog ormarića postupcima tehnologije deformiranja. Predmet istraživanja su metalni ormarići koji se proizvode i prodaju u slobodnoj trgovini. Takvi ormarići većinom su složeni od ravnih ploča lima te spajani u konačni proizvod ormarić s ladicama. Problem istraživanja je odabrati inicijalni lim te postupci deformiranja koji će doprinijeti da se oblikuje konačan proizvod u traženim tolerancijama. Zbog različitih... More radnih uvjeta te ponašanja metala koji mogu imati različita svojstva potrebno je najprije proračunati i simulirati izradu u softverskim rješenjima. Odabrani softver Fusion 360 nudi mogućnost oblikovanja pojedinih dijelova i konačnu vizualizaciju proizvoda. Nakon konstruiranja u softverskom rješenju Fusion 360 pristupit će se slaganju u softveru za gniježđenje Deepnest.io kako bi se izvršila optimizacija iskoristivosti materijala. Tehnologija koja se u proizvodnoj industriji sve više koristi je CAD tehnologija koja omogućuje inženjerima pretvorbu od samog izgleda proizvoda do proizvodnje istog. Gotovo je nemoguće zamisliti da se izrada modela, bilo to dvodimenzionalnih ili trodimenzionalnih, izračunavanje sila naprezanja te sila deformacije izvodi izvan okvira simulacijskih programa. Ovaj rad prvenstveno predstavlja korištenje CAD programa kako bi se njime izradio i lakše predočio model metalnog ormarića koji je moguće doraditi po želji, te napraviti statičko ispitivanje („Stress test“) čime se može utvrditi realna nosivost pojedine ladice, ali i ukupna nosivost metalnog ormarića. Rad obuhvaća kompletnu tehnologiju izrade ormarića počevši od ideje, do izrade modela korištenjem CAD alata, a u ovom slučaju to je program Fusion 360. Less
Abstract (english)
The hypothesis is the competitiveness of the application of Fusion 360 software technology in the construction of a metal cabinet by deformation technology procedures. The subject of the research are metal cabinets that are produced and sold in free trade. Such cabinets are mostly composed of flat sheets of sheet metal and joined into the final product cabinet with drawers. The problem of the research is to select the initial sheet and deformation procedures that will contribute to the... More formation of the final product in the required tolerances. Due to different operating conditions and the behavior of metals that may have different properties, it is necessary to first calculate and simulate the fabrication in software solutions. The selected Fusion 360 software offers the ability to design individual parts and the final visualization of the product. Once constructed in the Fusion 360 software solution, stacking in the Deepnest.io nesting software will be approached to optimize material utilization. The technology that is increasingly used in the manufacturing industry is CAD technology that allows engineers to transform from the very appearance of the product to its production. It is almost impossible to imagine that the development of models, whether two-dimensional or three-dimensional, the calculation of stress forces and deformation forces is performed outside the framework of simulation programs. This paper primarily represents the use of CAD program to make and more easily present a model of a metal cabinet that can be modified as desired, and make a static test ("Stress test") which can determine the real load capacity of each drawer, but also the total load capacity of the metal cabinet. . The work includes the complete technology of making cabinets, starting from the idea, to making a model using CAD tools, and in this case it is the Fusion 360 program. Less
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:137:426008
Study programmeTitle: Production Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2021-07-17 10:22:07
accessibility

closeAccessibilityrefresh

If you wish to permanently save changes, click on Save, if not - your settings will be reset when you restart the browser.